


Référence : Gp780 + ds650 head lock gyro combo
GP780 Gyro Heading Lock et DS650
GP780:
âBrand new intelligent control logic providing dynamic gain adjustment
by detecting current flying conditions, allowing for consistent
pirouetting rates during chaos or other demanding 3D maneuvers.
âUtilizes feed forward control logic to boost rudder starting speed, and increase response sensitivity.
âUtilizes Silicon Micro Machines (SMM) sensor with excellent stability to dramatically reduce in-flight tail drifts.
âUtilizes AHTCS (Active Helicopter Tail Control System) to compensate
any drift caused by wind direction and force, as well as unintended yaw
induced by helicopter itself during flight maneuvers.
âTailor made specifically for use with high speed digital rudder servos.
This gyro festures high sensitivity and minimal reaction time, fully
utilizing the potential of modern high speed digital rudder servos.
âSuitable for all sizes of helicopters, from micro indoor to large 90 size glow helicopters.
âMetallic dampening plate built into bottom gyro casing, dramatically increasing anti-vibration and anti-interference abilities.
âFeatures 1520μs pulse wide and 760μs narrow pulse wide frame rate.
âDigital/Analog servo switchable.
âReverse switch.
âRudder servo travel limit adjustment (ATV).
âMode switch for large/mini helicopter.
âDelay adjustment.
âGyro locking mode and gain can be adjusted remotely from the transmitter.
1.Mini/Micro heli mode, suitable for T-REX250/450(“STATUS”
Red);Medium/large heli mode, suitable for T-REX500/600/700(“STATUS"
Green)
2.There are 3 kinds of 760μs narrow pulse wide servos on the market, including Futaba S9251, S9256, BLS251.
DS650:
âUltra-speed servo for instant tail control reaction(0.048sec/60 deg).
â12 Bits 4096 signal resolution for smooth movements.
âUltra Performance Coreless Motor with fast reaction and low current.
âHardened high strength superalloy gears that increase the lifetime.
âAluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
âSupports digital & analog control signal.
âPowerful and precise servo, suitable for T-Rex 600/700 rudder use.
GP780 Ratings:
âOperating Voltage:DC 4.5~7V
âCurrent Consumption:<80mA @ 4.8V
âAngular Detection Speed:500 degrees/sec
âOperating Humidity:0â~65â
âRoHS certification.
âOperating Humidity:0%~95%
âSize:26x25x11mm
âWeight:14g
DS650 Ratings:
âStall torque:4.0kg.cm(4.8V)
5.0kg.cm(6.0V)
âMotion speed:0.058sec/60°(4.8V)
0.048sec/60°(6.0V)
âRating voltage:DC 4.8-6V
âTemperature range:-20°C~+60°C
âDimension:40.3x20.1x36mm
âWeight:56g
â1520μs standard band
Choisissez votre taille :
•
Taille normale -
195,90 €

Intro | Accueil | Concept | Pictures | News | Contact | Plan du site
site réalisé par
création site internet